broadcom bcm4312 (rev 02) hp 2133 FU339EA UNESTABLE

[c_mat]

Hello, I have hp 2133 model FU339EA

lspci output

02:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)


I install Ubuntu 9.04 (and other distros with similar problem but now talk about this) and install the free drivers b43 which offers ubuntu
First drivers work OK but it crash unannounced.

paste dmesg

[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006feb0000 (usable)
[ 0.000000] BIOS-e820: 000000006feb0000 - 000000006febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006febe000 - 000000006fef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x6feb0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006feb0000 (usable)
[ 0.000000] modified: 000000006feb0000 - 000000006febe000 (ACPI data)
[ 0.000000] modified: 000000006febe000 - 000000006fef0000 (ACPI NVS)
[ 0.000000] modified: 000000006fef0000 - 000000006ff00000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378c0000 - 37fefa7f
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb0a7f
[ 0.000000] Move RAMDISK from 00000000378c0000 - 0000000037fefa7e to 00881000 - 00fb0a7e
[ 0.000000] ACPI: RSDP 000F9EF0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 6FEB0100, 0064 (r1 HPQOEM SLIC-MPC 20080627 MSFT 97)
[ 0.000000] ACPI: FACP 6FEB0290, 00F4 (r4 HP FACP1303 20080627 MSFT 97)
[ 0.000000] ACPI: DSDT 6FEB0600, 909C (r2 68VGU 68VGUF03 F03 INTL 20061109)
[ 0.000000] ACPI: FACS 6FEBE000, 0040
[ 0.000000] ACPI: APIC 6FEB0390, 0060 (r2 HP APIC1303 20080627 MSFT 97)
[ 0.000000] ACPI: MCFG 6FEB03F0, 003C (r1 HP OEMMCFG 20080627 MSFT 97)
[ 0.000000] ACPI: SLIC 6FEB0430, 0176 (r1 HPQOEM SLIC-MPC 20080627 MSFT 97)
[ 0.000000] ACPI: WDRT 6FEB05B0, 0047 (r1 HP VT-8237S 20080627 MSFT 97)
[ 0.000000] ACPI: OEMB 6FEBE040, 00F0 (r1 HP OEMB1303 20080627 MSFT 97)
[ 0.000000] ACPI: HPET 6FEB96A0, 0038 (r1 HP VT-8237S 20080627 MSFT 97)
[ 0.000000] ACPI: SSDT 6FEBE130, 03A0 (r1 HP P001PM 1 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 906MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb0a7f] NEW RAMDISK ==> [0000881000 - 0000fb0a7f]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0006feb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0006feb0
[ 0.000000] On node 0 totalpages: 458293
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1814 pages used for memmap
[ 0.000000] HighMem zone: 230300 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 6ff00000:8ed00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454711
[ 0.000000] Kernel command line: root=UUID=d929c8e5-d1eb-4815-ae84-427e33ac341d ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.178 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 9168320 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1793088k/1833664k available (4126k kernel code, 39236k reserved, 2208k data, 532k init, 928456k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.35 BogoMIPS (lpj=6384712)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 128K (64 bytes/line)
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016927] SMP alternatives: switching to UP code
[ 0.325242] Freeing SMP alternatives: 18k freed
[ 0.325250] ACPI: Core revision 20080926
[ 0.330994] ACPI: Checking initramfs for custom DSDT
[ 1.004858] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.047006] CPU0: Centaur VIA C7-M Processor 1600MHz stepping 00
[ 1.048003] Brought up 1 CPUs
[ 1.048003] Total of 1 processors activated (3192.35 BogoMIPS).
[ 1.048003] CPU0 attaching NULL sched-domain.
[ 1.048003] net_namespace: 776 bytes
[ 1.048003] Booting paravirtualized kernel on bare hardware
[ 1.048003] Time: 20:22:47 Date: 04/27/09
[ 1.048003] regulator: core version 0.5
[ 1.048003] NET: Registered protocol family 16
[ 1.048003] EISA bus registered
[ 1.048003] ACPI: bus type pci registered
[ 1.048003] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.048003] PCI: Not using MMCONFIG.
[ 1.048003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 1.048003] PCI: Using configuration type 1 for base access
[ 1.049867] ACPI: EC: Look up EC in DSDT
[ 1.079097] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.080465] ACPI: Interpreter enabled
[ 1.080473] ACPI: (supports S0 S3 S4 S5)
[ 1.080509] ACPI: Using IOAPIC for interrupt routing
[ 1.080648] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.088739] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 1.088745] PCI: Using MMCONFIG for extended config space
[ 1.101350] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 1.101357] ACPI: EC: driver started in interrupt mode
[ 1.101725] ACPI: No dock devices found.
[ 1.101911] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.102006] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 1.102589] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.102597] pci 0000:00:02.0: PME# disabled
[ 1.102667] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.102675] pci 0000:00:03.0: PME# disabled
[ 1.102757] pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07]
[ 1.102768] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc883]
[ 1.102780] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807]
[ 1.102791] pci 0000:00:0f.0: reg 1c io port: [0xc480-0xc483]
[ 1.102803] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f]
[ 1.102815] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff]
[ 1.102897] pci 0000:00:10.0: reg 20 io port: [0xb800-0xb81f]
[ 1.102923] pci 0000:00:10.0: supports D1 D2
[ 1.102928] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.102936] pci 0000:00:10.0: PME# disabled
[ 1.103002] pci 0000:00:10.2: reg 20 io port: [0xb880-0xb89f]
[ 1.103027] pci 0000:00:10.2: supports D1 D2
[ 1.103032] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.103040] pci 0000:00:10.2: PME# disabled
[ 1.103104] pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f]
[ 1.103130] pci 0000:00:10.3: supports D1 D2
[ 1.103135] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.103143] pci 0000:00:10.3: PME# disabled
[ 1.103196] pci 0000:00:10.4: reg 10 32bit mmio: [0xfbeffc00-0xfbeffcff]
[ 1.103244] pci 0000:00:10.4: supports D1 D2
[ 1.103249] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.103257] pci 0000:00:10.4: PME# disabled
[ 1.103633] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 1.103644] pci 0000:01:00.0: reg 14 32bit mmio: [0xfc000000-0xfcffffff]
[ 1.103673] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbff0000-0xfbffffff]
[ 1.103686] pci 0000:01:00.0: supports D1 D2
[ 1.103739] pci 0000:00:01.0: bridge 32bit mmio: [0xfbf00000-0xfcffffff]
[ 1.103749] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.103819] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdffc000-0xfdffffff]
[ 1.103867] pci 0000:02:00.0: supports D1 D2
[ 1.103942] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[ 1.103950] pci 0000:00:02.0: bridge 32bit mmio: [0xfd000000-0xfdffffff]
[ 1.103962] pci 0000:00:02.0: bridge 64bit mmio pref: [0xde000000-0xdfffffff]
[ 1.104040] pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
[ 1.104049] pci 0000:00:03.0: bridge 32bit mmio: [0xfe000000-0xfe9fffff]
[ 1.104061] pci 0000:00:03.0: bridge 64bit mmio pref: [0xf8000000-0xfaffffff]
[ 1.104131] pci 0000:07:03.0: reg 10 32bit mmio: [0xfeaf0000-0xfeafffff]
[ 1.104184] pci 0000:07:03.0: PME# supported from D3hot D3cold
[ 1.104192] pci 0000:07:03.0: PME# disabled
[ 1.104246] pci 0000:00:13.1: transparent bridge
[ 1.104256] pci 0000:00:13.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 1.104290] bus 00 -> node 0
[ 1.104305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.104809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.105044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 1.105368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.105595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 1.105827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 1.157147] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 1.157147] pci 0000:80:01.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
[ 1.157147] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 1.157147] pci 0000:80:01.0: PME# disabled
[ 1.157147] bus 80 -> node 0
[ 1.157147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 1.157894] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.158226] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.160297] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 1.160625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.160952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.161297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.161642] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.161988] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.162254] ACPI: Power Resource [APMF] (off)
[ 1.162634] ACPI: WMI: Mapper loaded
[ 1.162991] SCSI subsystem initialized
[ 1.163060] libata version 3.00 loaded.
[ 1.163146] usbcore: registered new interface driver usbfs
[ 1.163178] usbcore: registered new interface driver hub
[ 1.163224] usbcore: registered new device driver usb
[ 1.163423] PCI: Using ACPI for IRQ routing
[ 1.163631] Bluetooth: Core ver 2.13
[ 1.163631] NET: Registered protocol family 31
[ 1.163631] Bluetooth: HCI device and connection manager initialized
[ 1.163631] Bluetooth: HCI socket layer initialized
[ 1.163631] NET: Registered protocol family 8
[ 1.163631] NET: Registered protocol family 20
[ 1.163631] NetLabel: Initializing
[ 1.163631] NetLabel: domain hash size = 128
[ 1.163631] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.163631] NetLabel: unlabeled traffic allowed by default
[ 1.163631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.163631] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.168127] AppArmor: AppArmor Filesystem Enabled
[ 1.168139] pnp: PnP ACPI init
[ 1.168139] ACPI: bus type pnp registered
[ 1.172030] Switched to high resolution mode on CPU 0
[ 1.175356] pnp: PnP ACPI: found 14 devices
[ 1.175362] ACPI: ACPI bus type pnp unregistered
[ 1.175370] PnPBIOS: Disabled by ACPI PNP
[ 1.175396] system 00:05: ioport range 0x3e0-0x3e7 has been reserved
[ 1.175403] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 1.175409] system 00:05: ioport range 0x500-0x501 has been reserved
[ 1.175416] system 00:05: ioport range 0x800-0x87f has been reserved
[ 1.175422] system 00:05: ioport range 0x400-0x41f has been reserved
[ 1.175432] system 00:05: iomem range 0xfecc0000-0xfecc0fff has been reserved
[ 1.175439] system 00:05: iomem range 0xfed02000-0xfed02fff has been reserved
[ 1.175454] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.175461] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.175474] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.175487] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 1.175493] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 1.175500] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 1.175507] system 00:0c: iomem range 0x100000-0x6fefffff could not be reserved
[ 1.175514] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 1.210405] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.210411] pci 0000:00:01.0: IO window: disabled
[ 1.210420] pci 0000:00:01.0: MEM window: 0xfbf00000-0xfcffffff
[ 1.210429] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.210441] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 1.210447] pci 0000:00:02.0: IO window: 0xd000-0xdfff
[ 1.210457] pci 0000:00:02.0: MEM window: 0xfd000000-0xfdffffff
[ 1.210465] pci 0000:00:02.0: PREFETCH window: 0x000000de000000-0x000000dfffffff
[ 1.210477] pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
[ 1.210483] pci 0000:00:03.0: IO window: 0xe000-0xefff
[ 1.210493] pci 0000:00:03.0: MEM window: 0xfe000000-0xfe9fffff
[ 1.210502] pci 0000:00:03.0: PREFETCH window: 0x000000f8000000-0x000000faffffff
[ 1.210514] pci 0000:00:13.1: PCI bridge, secondary bus 0000:07
[ 1.210519] pci 0000:00:13.1: IO window: disabled
[ 1.210528] pci 0000:00:13.1: MEM window: 0xfea00000-0xfeafffff
[ 1.210535] pci 0000:00:13.1: PREFETCH window: disabled
[ 1.210559] pci 0000:00:01.0: setting latency timer to 64
[ 1.210580] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 1.210588] pci 0000:00:02.0: setting latency timer to 64
[ 1.210604] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 1.210612] pci 0000:00:03.0: setting latency timer to 64
[ 1.210624] pci 0000:00:13.1: setting latency timer to 64
[ 1.210632] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.210637] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.210643] bus: 01 index 0 mmio: [0x0-0x0]
[ 1.210648] bus: 01 index 1 mmio: [0xfbf00000-0xfcffffff]
[ 1.210653] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[ 1.210658] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.210663] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 1.210669] bus: 02 index 1 mmio: [0xfd000000-0xfdffffff]
[ 1.210674] bus: 02 index 2 mmio: [0xde000000-0xdfffffff]
[ 1.210679] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.210684] bus: 05 index 0 io port: [0xe000-0xefff]
[ 1.210690] bus: 05 index 1 mmio: [0xfe000000-0xfe9fffff]
[ 1.210695] bus: 05 index 2 mmio: [0xf8000000-0xfaffffff]
[ 1.210700] bus: 05 index 3 mmio: [0x0-0x0]
[ 1.210705] bus: 07 index 0 mmio: [0x0-0x0]
[ 1.210710] bus: 07 index 1 mmio: [0xfea00000-0xfeafffff]
[ 1.210715] bus: 07 index 2 mmio: [0x0-0x0]
[ 1.210720] bus: 07 index 3 io port: [0x00-0xffff]
[ 1.210725] bus: 07 index 4 mmio: [0x000000-0xffffffff]
[ 1.210731] bus: 80 index 0 io port: [0x00-0xffff]
[ 1.210736] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[ 1.210762] NET: Registered protocol family 2
[ 1.211020] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.211607] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.212820] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.213407] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.213414] TCP reno registered
[ 1.213614] NET: Registered protocol family 1
[ 1.213836] checking if image is initramfs... it is
[ 2.576665] Freeing initrd memory: 7358k freed
[ 2.576756] cpufreq: No nForce2 chipset.
[ 2.577012] audit: initializing netlink socket (disabled)
[ 2.577036] type=2000 audit(1240863767.576:1): initialized
[ 2.594159] highmem bounce pool size: 64 pages
[ 2.594170] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.596933] VFS: Disk quotas dquot_6.5.1
[ 2.597060] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.598323] fuse init (API version 7.10)
[ 2.598501] msgmni has been set to 1704
[ 2.598857] alg: No test for stdrng (krng)
[ 2.598879] io scheduler noop registered
[ 2.598883] io scheduler anticipatory registered
[ 2.598888] io scheduler deadline registered
[ 2.598937] io scheduler cfq registered (default)
[ 2.598973] PCI: VIA PCI bridge detected.Disabling DAC.
[ 2.599087] pci 0000:01:00.0: Boot video device
[ 2.605533] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 2.605589] pcieport-driver 0000:00:02.0: found MSI capability
[ 2.605637] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 2.605657] pci_express 0000:00:02.0cie00: allocate port service
[ 2.605690] pci_express 0000:00:02.0cie01: allocate port service
[ 2.605713] pci_express 0000:00:02.0cie02: allocate port service
[ 2.605742] pci_express 0000:00:02.0cie03: allocate port service
[ 2.605824] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 2.605883] pcieport-driver 0000:00:03.0: found MSI capability
[ 2.605929] pcieport-driver 0000:00:03.0: irq 2302 for MSI/MSI-X
[ 2.605951] pci_express 0000:00:03.0cie00: allocate port service
[ 2.605978] pci_express 0000:00:03.0cie01: allocate port service
[ 2.606001] pci_express 0000:00:03.0cie02: allocate port service
[ 2.606025] pci_express 0000:00:03.0cie03: allocate port service
[ 2.609178] aer 0000:00:02.0cie01: AER service couldn't init device: no _OSC support
[ 2.612344] aer 0000:00:03.0cie01: AER service couldn't init device: no _OSC support
[ 2.612367] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.613092] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.669563] ACPI: AC Adapter [AC0] (off-line)
[ 2.684661] ACPI: Battery Slot [BAT1] (battery present)
[ 2.684793] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.684800] ACPI: Power Button (FF) [PWRF]
[ 2.684911] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0D:00/input/input1
[ 2.685020] ACPI: Lid Switch [LID]
[ 2.685109] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.685121] ACPI: Sleep Button (CM) [SLPB]
[ 2.685201] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 2.685207] ACPI: Power Button (CM) [PWRB]
[ 2.686283] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.686328] processor ACPI_CPU:00: registered as cooling_device0
[ 2.686336] ACPI: Processor [P001] (supports 16 throttling states)
[ 2.696046] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.700775] ACPI: Thermal Zone [THRM] (60 C)
[ 2.700892] isapnp: Scanning for PnP cards...
[ 3.054918] isapnp: No Plug & Play device found
[ 3.057535] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.059286] brd: module loaded
[ 3.059879] loop: module loaded
[ 3.060091] Fixed MDIO Bus: probed
[ 3.060104] PPP generic driver version 2.4.2
[ 3.060226] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 3.060294] Driver 'sd' needs updating - please use bus_type methods
[ 3.060312] Driver 'sr' needs updating - please use bus_type methods
[ 3.060600] sata_via 0000:00:0f.0: version 2.4
[ 3.060627] sata_via 0000:00:0f.0: power state changed by ACPI to D0
[ 3.060650] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.060711] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 3.060864] scsi0 : sata_via
[ 3.061055] scsi1 : sata_via
[ 3.064185] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[ 3.064192] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[ 3.268017] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 3.432245] ata1.00: ATA-8: Hitachi HTS542512K9A300, BB2OC3MP, max UDMA/100
[ 3.432252] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.448266] ata1.00: configured for UDMA/100
[ 3.652022] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.662898] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[ 3.663085] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.663111] sd 0:0:0:0: [sda] Write Protect is off
[ 3.663117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.663155] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.663279] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.663302] sd 0:0:0:0: [sda] Write Protect is off
[ 3.663308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.663344] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.663352] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.731382] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.731494] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.732653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.732699] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.732745] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.732861] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 3.732911] ehci_hcd 0000:00:10.4: debug port 1
[ 3.732928] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbeffc00
[ 3.744019] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.744156] usb usb1: configuration #1 chosen from 1 choice
[ 3.744207] hub 1-0:1.0: USB hub found
[ 3.744225] hub 1-0:1.0: 8 ports detected
[ 3.744434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.744484] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.744583] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.744597] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.744678] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.744724] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800
[ 3.744872] usb usb2: configuration #1 chosen from 1 choice
[ 3.744924] hub 2-0:1.0: USB hub found
[ 3.744940] hub 2-0:1.0: 2 ports detected
[ 3.745087] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.745099] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.745176] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 3.745204] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[ 3.745344] usb usb3: configuration #1 chosen from 1 choice
[ 3.745390] hub 3-0:1.0: USB hub found
[ 3.745404] hub 3-0:1.0: 2 ports detected
[ 3.745553] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.745564] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.745636] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.745675] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[ 3.745812] usb usb4: configuration #1 chosen from 1 choice
[ 3.745858] hub 4-0:1.0: USB hub found
[ 3.745874] hub 4-0:1.0: 2 ports detected
[ 3.746108] usbcore: registered new interface driver libusual
[ 3.746170] usbcore: registered new interface driver usbserial
[ 3.746195] USB Serial support registered for generic
[ 3.746226] usbcore: registered new interface driver usbserial_generic
[ 3.746231] usbserial: USB Serial Driver core
[ 3.746344] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
[ 3.750541] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.753206] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.753217] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.753223] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.753229] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.753234] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.753567] mice: PS/2 mouse device common for all mice
[ 3.753883] rtc_cmos 00:07: RTC can wake from S4
[ 3.753957] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.754004] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.754165] device-mapper: uevent: version 1.0.3
[ 3.754390] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.754473] device-mapper: multipath: version 1.0.5 loaded
[ 3.754479] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.754659] EISA: Probing bus 0 at eisa.0
[ 3.754711] EISA: Detected 0 cards.
[ 3.754819] cpuidle: using governor ladder
[ 3.754928] cpuidle: using governor menu
[ 3.756053] TCP cubic registered
[ 3.756257] NET: Registered protocol family 10
[ 3.757082] lo: Disabled Privacy Extensions
[ 3.757763] NET: Registered protocol family 17
[ 3.757801] Bluetooth: L2CAP ver 2.11
[ 3.757805] Bluetooth: L2CAP socket layer initialized
[ 3.757811] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.757815] Bluetooth: SCO socket layer initialized
[ 3.757894] Bluetooth: RFCOMM socket layer initialized
[ 3.757909] Bluetooth: RFCOMM TTY layer initialized
[ 3.757913] Bluetooth: RFCOMM ver 1.10
[ 3.758415] longhaul: APIC detected. Longhaul is currently broken in this configuration.
[ 3.758494] Using IPI No-Shortcut mode
[ 3.758678] registered taskstats version 1
[ 3.758946] Magic number: 5:960:397
[ 3.759029] mem random: hash matches
[ 3.759137] rtc_cmos 00:07: setting system clock to 2009-04-27 20:22:49 UTC (1240863769)
[ 3.759144] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.759148] EDD information not available.
[ 3.759807] Freeing unused kernel memory: 532k freed
[ 3.760119] Write protecting the kernel text: 4128k
[ 3.760216] Write protecting the kernel read-only data: 1532k
[ 3.805139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.056035] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 4.228506] usb 1-8: configuration #1 chosen from 1 choice
[ 4.627558] b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 4.627575] b43-pci-bridge 0000:02:00.0: setting latency timer to 64
[ 4.684161] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 4.822789] tg3.c:v3.94 (August 14, 2008)
[ 4.822824] tg3 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.927151] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:22:64:55:a6:18
[ 4.927162] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 4.927168] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 5.599280] Marking TSC unstable due to TSC halts in idle
[ 5.611160] PM: Starting manual resume from disk
[ 5.611169] PM: Resume from partition 8:1
[ 5.611172] PM: Checking hibernation image.
[ 5.611507] PM: Resume from disk failed.
[ 5.658884] kjournald starting. Commit interval 5 seconds
[ 5.658910] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.000069] Clocksource tsc unstable (delta = -335081871 ns)
[ 11.810607] udev: starting version 141
[ 12.079266] Linux agpgart interface v0.103
[ 12.089575] lis3lv02d: hardware type HP2133 found.
[ 12.110211] agpgart: Detected VIA P4M900 chipset
[ 12.123351] acpi device:0a: registered as cooling_device1
[ 12.123902] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/device:09/input/input6
[ 12.124152] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 12.148302] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.188128] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 12.201778] lis3lv02d driver loaded.
[ 12.221033] leds-hp-disk driver loaded.
[ 12.318346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.420162] cfg80211: Calling CRDA to update world regulatory domain
[ 12.601864] b43-phy0: Broadcom 4311 WLAN found
[ 12.672859] phy0: Selected rate control algorithm 'pid'
[ 12.729434] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMA1 [0x400-0x40f]
[ 12.729442] ACPI: Device needs an ACPI driver
[ 12.854234] Linux video capture interface: v2.00
[ 12.992245] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 13.063271] uvcvideo: Found UVC 1.00 device CNF7070 (04f2:b107)
[ 13.065055] input: CNF7070 as /devices/pci0000:00/0000:00:10.4/usb1/1-8/1-8:1.0/input/input8
[ 13.080791] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 13.084390] usbcore: registered new interface driver uvcvideo
[ 13.084439] USB Video Class driver (v0.1.0)
[ 13.204528] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 13.649645] HDA Intel 0000:80:01.0: power state changed by ACPI to D0
[ 13.649674] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.650139] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 13.650147] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 13.869544] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
[ 13.908635] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 13.999916] cfg80211: World regulatory domain updated:
[ 13.999925] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.999933] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.999939] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.999946] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.999952] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.999959] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.446738] lp: driver loaded but no devices found
[ 14.496317] eps: Detected VIA Model D C7-M
[ 14.496326] eps: Current voltage = 988mV
[ 14.496330] eps: Current multiplier = 8
[ 14.496334] eps: Highest voltage = 988mV
[ 14.496338] eps: Highest multiplier = 8
[ 14.496341] eps: Lowest voltage = 796mV
[ 14.496345] eps: Lowest multiplier = 4
[ 14.544845] ieee80211_crypt: registered algorithm 'NULL'
[ 14.548066] ieee80211_crypt: registered algorithm 'TKIP'
[ 14.567636] wl: module license '' taints kernel.
[ 14.785878] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
[ 14.909639] Adding 1325320k swap on /dev/sda6. Priority:-2 extents:1 across:1325320k
[ 14.961183] EXT3 FS on sda5, internal journal
[ 16.181257] type=1505 audit(1240863781.920:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1981
[ 16.323542] type=1505 audit(1240863782.060:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1985
[ 16.323902] type=1505 audit(1240863782.060:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1985
[ 16.324173] type=1505 audit(1240863782.064:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1985
[ 16.324304] type=1505 audit(1240863782.064:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1985
[ 16.729351] type=1505 audit(1240863782.468:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1990
[ 16.729899] type=1505 audit(1240863782.468:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1990
[ 16.810932] type=1505 audit(1240863782.548:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1994
[ 20.691796] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.691817] Bluetooth: BNEP filters: protocol multicast
[ 20.736878] Bridge firewalling registered
[ 22.581491] [drm] Initialized drm 1.1.0 20060810
[ 22.600932] ppdev: user-space parallel port driver
[ 26.548442] ADDRCONF(NETDEV_UP): eth0: link is not ready

[andreasl]

Hello,

which Status has your Hardware Wlan Switch, ist it blue or orange ?
Sometimes I must turn the switch on/off for 1 or two times to get Wlan working. I think it is important to have wlan on at boot Time (blue light).

So long Andreas

[c_mat]

My status is always blue.

When crash is blue, always blue.

The principal problem is that is unestable. Sometimes when close the lid (In Spanish:

Cuando cierro la tapa del portatil) wifi crash. I think that dmesg output says that power is turned off but the light is blue. If someone have the same Broadcom wifi please tell me how to configure step by step. I'm using free driver installed by ubuntu and I tried with propietary driver ofered by Ubuntu 9.04 as well but the result is worse than free "Unestable" Driver.

Repeat, PLEASE If someone have the same Broadcom wifi please tell me how to configure step by step.

[andreasl]

Hallo,

is ist possible that you are using both modules:

[ 12.601864] b43-phy0: Broadcom 4311 WLAN found
...
[ 13.204528] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
...
[ 14.567636] wl: module license '' taints kernel.

b43 is the free module from kernel tree, wl is the commercial Module from Broadcom. You have to use only one of them.

1.) take both to the blacklist and try one module loading by hand after rebooting.
I am using mandriva2009.0 not ubuntu, in my distro the blacklist is in /etc/modules.

2.) after new boot without any wlan modul try to load the kernel Modul:

sudo modprobe b43

works ?

if not unload the kernel Modul and his dependices:

sudo rmmod b43 rfkill_input rfkill rng_core mac80211 led_class input_polldev ssb

and try to load the Broadcom Modul:

sudo modprobe wl

works ?

to unload the Broadcom Modul and his dependices:

sudo rmmod wl ieee80211_crypt_tkip ieee80211_crypt cfg80211

So long Andreas

HP2133, 2GB, 160 GB, 1280x768, Mandriva2009.0, kernel 2.6.27.19

[c_mat]

First thank you for your answer.

I have blacklisted (/etc/modprobe.d/blacklist)

b43 and wl modules, after reboot wifi works correctly. I think that isn't

normal...

After

sudo rmmod b43

(led wifi turns orange)

and

sudo rmmod wl

after

sudo modprobe b43

So far works correctly...